Dead Hands Chipping: Styles, Setup, and When to Use Each

Master different chipping techniques for better short game results.

personGo Live Golf calendar_todayOctober 29, 2026 schedule5 min read visibility17 views
Dead Hands Chipping: Styles, Setup, and When to Use Each

Dead hands chipping is a golf technique where you minimize wrist hinge and keep your wrists quiet, using your arms and body rotation to control the shot. This produces a consistent, low-running chip ideal for right-handed golfers when there’s plenty of green to work with and the lie is clean and firm.

Key takeaways

  • Dead hands chipping uses minimal wrist action for consistency.
  • Different chipping styles suit different lies and green conditions.
  • Club selection is critical for trajectory and rollout.
  • Excessive forward shaft lean can cause digging on soft or tight lies.
  • Practice various techniques to handle any short game situation.

What is dead hands chipping and when should you use it?

This technique, also called quiet wrists chipping, involves little to no wrist hinge or flipping through impact. The shoulders and chest drive the motion, much like a putting stroke. This style is best used from a clean, firm lie when you have ample green between you and the hole. It produces a predictable, low-running shot with less risk of chunking or blading the ball. However, it may not work well from thick rough, as the lack of wrist hinge makes it harder to cut through heavy grass. [formcaddie.com]

How do other chipping styles compare?

  • Forward shaft lean / hands-ahead chip: Hands ahead of the ball, slight shaft lean, and a descending blow. Ideal for firm turf and low, running chips but can dig into soft or tight lies if overdone. [golfdecode.com]
  • Putting-style chip: Uses a putting stroke with a less-lofted club (like a 7-iron or hybrid). Great for firm, even ground when there’s no obstacle between you and the hole. [golf.com]
  • Bump-and-run: Employs a 7- or 8-iron for a low shot that lands early and rolls out. Best on firm turf with plenty of green to work with. [swingvantage.com]
  • Higher-lofted soft chip using bounce: Uses a wedge’s bounce for a higher, softer landing, especially useful when you need to carry an obstacle or stop the ball quickly. [golfmonthly.com]

How to set up for dead hands chipping

For right-handed golfers, a proper setup is key to success with this technique. Use a narrow stance, place most of your weight on your lead (left) foot, and position your hands just slightly ahead of the ball. The ball should be back in your stance, but not too far. Keep your wrists firm and quiet throughout the motion, letting your arms and body rotate to move the club. This setup helps ensure a downward strike and solid contact. [golfmonthly.com]

When to use each chipping technique (and when not to)

  • Dead hands chipping: Use from clean, firm lies with lots of green. Avoid in thick rough or fluffy lies.
  • Forward shaft lean: Use on firm turf for low chips. Avoid excessive lean on soft or tight lies to prevent digging.
  • Putting-style chip: Use on flat, firm ground with no obstacles. Avoid if you need to carry rough or a bunker.
  • Bump-and-run: Use when you have plenty of green and predictable rollout. Avoid on soft, slow greens or if you need to carry an obstacle.
  • Soft chip with bounce: Use from fluffy lies, soft turf, or when you need to stop the ball quickly. Avoid on hardpan or tight lies where bounce can cause thin shots.

Common mistakes to avoid in chipping

  • Too much forward shaft lean: Can cause the club’s leading edge to dig, especially on soft or tight lies.
  • Flipping the wrists: Leads to inconsistent contact and distance control. Keep wrists firm and quiet.
  • Ignoring the lie: Using the same technique regardless of the lie often leads to poor results. Adjust your approach based on turf and grass conditions.
  • Poor club selection: Using too much or too little loft for the shot at hand can make distance control difficult.

Step-by-step: Dead hands chipping drill

  1. Choose a wedge or short iron and set up with a narrow stance, weight on your lead foot, and the ball just back of center.
  2. Keep your wrists quiet and use your shoulders and chest to swing the club back and through, brushing the grass for a clean strike.

Club selection for chipping

Choosing the right club is crucial for controlling trajectory and rollout. Use a 7- or 8-iron for bump-and-run shots where you want more roll, and higher-lofted wedges for shots that need to carry an obstacle or stop quickly. Always consider the lie, green speed, and how much room you have to work with. For more on ball position and club choice, see our guide to ball position for every club.

Practicing your chipping techniques

Regular practice with different chipping styles and clubs builds confidence and adaptability. Set up practice stations with various lies and targets to simulate on-course situations. Go Live Golf’s Practice Plans let you build custom routines and even read them out loud, helping you reinforce the right technique.

Frequently asked questions

What is dead hands chipping?

Dead hands chipping is a technique where the wrists remain quiet throughout the stroke, relying on the arms and body rotation to move the club. This produces a consistent, low-running chip and reduces the risk of mishits, especially from clean lies with plenty of green to work with.

When should I avoid dead hands chipping?

Avoid this method in thick rough or fluffy lies, as the lack of wrist hinge can make it difficult for the club to cut through heavy grass. In these cases, a technique with more wrist hinge or use of the club’s bounce may be more effective.

How does club selection affect chipping results?

Club selection determines the ball’s trajectory and how much it rolls after landing. Lower-lofted clubs like a 7- or 8-iron produce more rollout, while higher-lofted wedges create higher, softer shots with less roll. Choose based on the lie, green speed, and how much carry or rollout you need.

Why is excessive forward shaft lean a problem?

Too much forward shaft lean can cause the club’s leading edge to dig into the turf, especially on soft or tight lies. This often leads to fat or thin shots. Use only slight shaft lean and adjust based on the lie for better results.

How can I practice different chipping techniques?

Set up practice drills with various clubs and lies to simulate real course conditions. Focus on using quiet wrists, experimenting with shaft lean, and learning how each club reacts on different turf. Go Live Golf’s Instructor tool can provide drills and video resources tailored to your needs.

Sources

Want more short game help? Ask a question or get custom drills with the Go Live Golf Instructor or explore our Practice Plans for guided improvement.

#dead hands chipping#golf chipping techniques#bump and run#chipping club selection#quiet wrists chip#putting style chip#golf short game#chipping setup
Share sms Text mail Email thumb_up Facebook alternate_email X
sports_golf

Take Go Live Golf out on the course

Free live scoring, the games you play and automatic settle up. Your friends can watch every shot.

More tips

  1. Golf Tempo Under Pressure: Why Consistency Matters
  2. Over the Top Golf Swing: Causes, Fixes, and Drills
  3. Best Golf Teaching Methods Backed by Research
  4. Why Drop the Club in the Downswing Increases Speed
  5. Golf Glove Chipping: Should You Chip With or Without a Glove?
  6. Dead Hands Chipping: Styles, Setup, and When to Use Each
  7. Casting the Golf Club: Causes, Fixes, and Drills
  8. Golf Ball Position for Every Club and Shot
  9. Putting Grip Pressure: How Light Hands Improve Your Stroke

All tips →

Related guides

Comments

No comments yet. Be the first.

Sign in to join the conversation. Golfers on Go Live Golf can comment on any post. login Sign in to comment